- Home
- ยป
- Our Products
- »
- Movable Weighbridge
Movable Weighbridge
Modular Pitless Weighbridge
Minimum Order Quantity: 1 Piece
Product Brochure
Material | Mild Steel |
Type | Computerized |
Weighing Capacity | Up to 100 ton |
Brand | EXPERT |
Load Capacity | 5 Mt To 120 Mt |
Size | Customize |
Color | Customize |
Power Source | Electric |
Features | Customize |
Taring Range | Customize |
Output | 12 V |
Insulation | Customize |
Resolutions | Customize |
Ramps | Customize - If Required |
Approaches | Customize |
Calibration | Customize |
Number of Load Cell | Customize |
Operating Temperature | Customize |
IP Rating | Customize |
Length series | Customize |
Platform Length | 6 - 20 m |
Platform Width | Up to 4 m |
Frequency | 50/60 Hz |
Voltage | 380 V |
This is a new and revolutionary concept that offers a high level of accuracy and the lowest level of maintenance than major of the other weighbridges. Available in both pit and surface mounted variants; modular weigh bridge provides a very cost-effective solution for a wide range of applications. All the weighbridges available today whether a pit or pitless requires civil foundation costing at least Rs. 4 lakhs to Rs. 6 Lakhs. This could be minimized to a great extent by installing our weighbridge. Our weigh bridge could be installed as a pit mounted or pitless type permanently in a site if the adopting need arises. We hope that your adopting the latest technology in weighing solution is much brighter and hence, we kindly request you to consider our offer favorably.
Ramps:
In the case of surface mounted weigh bridges, approach ramps are required which can be of concrete or steel structure. Remember that ramps take the brute force of being hit by a vehicle as it mounts the ramp. Concrete can offer longevity, while steel is ideal if the weighbridge is likely to be moved.
Features:
- Raft foundation helps in the Low cost of ownership.
- Strong construction, reliable & long life
- Fully welded platform structure
- Flexible module design
- Easy loading/unloading quick installation
- Box channel (Hollow).
- Fully welded I-beam type
- Checkered & plane plate with anti-skid strips
- Both side vehicle guide rails
Additional Information:
- Production Capacity: 50
- Delivery Time: 10 Days
- Packaging Details: As per Order
Flexi Mobile Weighbridge
Product Brochure
Accuracy | +/- 10 Kg |
Approach And Exit Roadways | 5 ~ 10 meters (min) |
Type Of Weighing | Static Weighing |
Load Cell Cable | 4 Core Shielded Cable |
Load Cells | 20 Ton / 30 Ton IP 68 Protected |
Direction of Weighing | One Direction |
Maximum Gross Weight of Vehicle | 100 Meter |
Operating Temperature Range | -10 Degree to + 60 Degree |
Material Of The Platform | Mild Steel (IS 2062) |
Maximum Capacity Each Scale | 60 Ton |
Platform Size | 600 mm X 2700 mm |
Nos of Load cell | 06 Set |
No of Axle | 2 & 3 Axle Pair |
Indicator Resolution | 10 Kg |
Static Accuracy | +/- 0.02% to +/- 0.05% |
Maximum Axle Weight | 40 Meter |
Non Linearity And Repeatability | 0.05% |
Other Details:
Expert - Flexi Mobile weighbridge integrates low profile and adjustable platform; it's an innovative product with inbuilt ramps and hydraulic jacks. It has a technologically sound tension link mounting arrangement that ensures reliability and high accuracy for weight measurement. This also creates a smooth performance of the load cell. Double-ended shear beam load cell assures long life with its simple, rugged and compact design hermetically sealed construction.
- Adjustable platforms to suit different carriers
- Low profile with a built-in ramp
- Easy setup, connect & weigh
- Without civil foundation
- Approved by weights & measures department
- Can be shifted easily
- Low cost
- Light-weight design for ease in shifting from place to place
Electronic Portable Weighbridge
Weighing Capacity | Up to 40 Ton |
Power Source | Electric |
Material | MS plate |
Width | Up to 24 Inch |
Accuracy | Up to 8 Kg |
Length | Up to 12 Inch |
Computerized Truck Weighbridg
Material | Mild Steel |
Power Source | Electric |
Frequency | 50 Hz |
Accuracy | 5 Kg |
Capacity | Up to 60 Tons |
Length | Up to 7 m |
Width | Up to 300 mm |
Mobile Weighbridge
Power Source | Electric |
Material | Mild Steel |
Accuracy | 5 Kg |
Capacity | Up to 60 Tons |
Width | Up to 300 mm |
Length | Up to 7 m |
Modular U Shape Weighbridge
Product Brochure
Load Capacity | 10T to 150T |
Accuracy | 5 Kg |
Length | 5 to 10 m |
Shape | S Shape |
Capacity | Up to 70 ton |
Power Supply | 90 V - 270 V |
Open Rib Versus Closed Rib:
There are many ways to design an orthotropic bridge section. The two most common are the open-rib deck (Figure 1) and the closed-rib deck (Figure 2). Please note that the closed-rib design is constructed of individual ribs, not a sandwich of plates and beams. The sandwich design does not offer the same structural efficiency as the closed-rib design. Although the open-rib and closed-rib concepts are similar, the closed-rib design is significantly stronger. Let’s take a look at why. Another benefit of the closed-rib design is that the ribs resist buckling. Figure 5 shows an open rib that is directly under the load. The beam’s web can buckle to either the right or left, causing the rib to fail. To protect against buckling, you would need to add stiffeners to the beam. Figure 6 shows one leg of a closed rib and the direction in which it will always tend to buckle. Figure 7 shows a closed rib with a trapezoidal design. Since each leg tends to buckle toward the inside of the rib, the two forces act against each other. The flat section connecting the two legs transfers the load from one leg to the other, eliminating the possibility that the rib’s legs will buckle. What if the closed rib were square (Figure 8) instead of trapezoidal? As with the I-beam design, the legs can buckle in either direction. The flat bottom of the rib is less effective because both legs could fail in the same direction, causing the rib to collapse.
Silent Features Of Expert – Orthotropic Weigh Bridge:
- We manufacture superior weigh bridge structures employing the globally accepted technology of Closed Orthotropic sections.
- The structures are manufactured by using closed orthotropic sections U beams. Each module is seal welded including a top plate, side plates and contains orthotropic beams, as depicted in the GA drawings.
- This orthotropic geometry offers even load distribution throughout the structure. When there is concentrated loading on the structure there is minimum deflection and the load transfer is always vertical on the Load cells. This results in highly accurate Weighment.
- In bolted I beam based structures, the strength of bolts becomes very critical and sometimes leads to failure. As orthotropic structures are completely welded, the chance of structural failure is minimized.
- These superior structures are designed using latest CAD and CAE procedures. Each structure is analyzed through our advanced structural software. These structures are also tested by using actual weights.
- Compared to I beams available in the market which are re-rolled by many manufacturers, the thickness of the flange and web varies along the length of the beam leading to lower structural strength.
Self Contained Modular Weighbridge
Usage/Application | Construction Site |
Power Source | Electric |
Material | MS |
Capacity | Up to 70 ton |
Platform Length | 6 m - 20 m |
Built Type | Modular |
Our Self Contained Modular Weighbridge portable truck scales are completely self-contained, have minimal foundation requirements and feature a low-profile design, making them easy to set up or move to wherever you need a portable vehicle weighing solution. There is no pit required, just a concrete or wood timbers base. All of our scales are legal for trade and are built with high-quality steel. They are designed for long-lasting durability and superior performance. The scales feature easy access to the load cells, which makes future service calls quick and efficient. Our scales also come with man way access hatches for easy cleaning and come in custom lengths and widths. We also stock accessories such as portable scale shacks, programmable weigh indicators, traffic light control systems, and software. Manufactured by Expert Weighing and made in India.