Electronic Weighbridge

Product Details:

Our steel truck scale decks offer higher strength, greater reliability and faster installation than conventional systems. Their simple foundations, fast, bolt-down sitting and innovative box construction have made them the preferred choice of operators across the country.You can choose either a Surface Mounted or a Pit Mounted truck scale depending on the space availability. The platform of the truck scale is designed to withstand harsh environmental conditions.

These weighbridges are installed in a pit, keeping them flush to the road surface. Because these bridges do not require ramps, they take up less surface area, making them ideal for smaller areas or sites where space is at a premium. Initial civil and foundation work can make pit installations a more expensive option. A pit is also prone to piling of debris and waterlogging, requiring the provision of sump-pumps and manholes for maintenance purposes. Guide-rails are not required for pit mounted bridges.

Benefits:-

• Costly Pit construction is eliminated.
• Platform above ground level- No water logging during rainy season
• Problem of pit maintenance is eliminated.
• Easy maintenance since all parts accessible above ground level.
• In Pitless weighbridges RCC ramp work must be required at least 3 meters for both sides for easy movement of vehicle

Product Details:

Multi Deck Weighbridge is really a variation of a design, rather than another weigh bridges type. for example, multi-deck weigh bridges may be above ground, a semi-pit, or a fully in-ground design. The number and length of the decks very according to your requirements. Decks need not be of the same length.The advantages of multiple deck weighbridge are that individual axles, or axle groups, are weighed individually and simultaneously. This is ideal for weighbridge that will be used to record axle breakdown weights as it's the primary function.

Consideration for the corresponding weighbridge type (above ground, Semi-pit and fully in the ground) still apply. Mid-deck restraining assemblies are typically installed between decks to limit deck movement. A purpose-built, intelligent digital weight terminal is provided which can sum the weight of all decks and can display the total weight or individual deck weights.

Product Details:

We have supplied various Bulker Loading Weighbridge and Spouts for Cement, sand and other Bulk materials. We are incorporating the concept of Loss in Weight Calculation in Bulk filling. It means that wherever there is no facility of weighbridge or Solid Flow Meters, our Programmable system fills the material as per the Target Value. For Example, if there is a collecting bin of capacity of 30 Tonnes, we can fill a Bulker of 12 Tonnes, 10 Tonnes and 08 Tonnes after each filling of Bin. Once the Bin is empty, it again fills the material for further dispensing. These systems are most accurate and efficient for Bulk filling.

Product Details:

Pitless Type Weighbridge:
This type of weighbridge sits above of the road surface and requires ramps on either end to allow the vehicles to access the platform. The amount of civil foundations work required is reduced for surface mounted scales, but the overall space requirement is more. Before purchasing, check the overall height of the ‘Weighbridge’. Higher decks need longer ramps, which increase the overall footprint of the weighbridge as well as the turning circle for vehicles approaching the bridge. Generally, surface mounted weighbridges require guide rails fixed on the sides of the platform, which help vehicles to be aligned centrally on the bridge. This type of installation is better suited when the bridge may need to be shifted, or for temporary (sometimes called ‘portable’) installations.In most cases the site conditions, such as availability of space, will dictate the type of weighbridge available to you. Both surface and pit mounted weighbridges require a firm surface with load bearing capacity, the details of which will be specified in the ‘Plan of Foundation’ drawings provided by the weighbridge supplier.It may be advantageous to choose a weighbridge which has a common structural design for surface and pit mounting, this will allow future flexibility for changing the type of weighbridge

Benefits :-

• Costly Pit construction is eliminated.
• Platform above ground level- No water logging during rainy season
• Problem of pit maintenance is eliminated.
• Easy maintenance since all parts accessible above ground level.
• In Pitless weighbridges RCC ramp work must be required at least 3 meters for both sides for easy movement of vehicle

Product Details:

The “Expert” Off Road Weighbridge is a high structural strength design to withstand very high concentrated axle loads of articulated vehicles used in off-road applications.The weigh bridge deck consists of four (2/4) modules.One bridge consists of 2 separate scales, Each scale includes four (4) bridge modules and three (3) Load Cells Height of the Deck - 500/600/650 mm from the load cell base plate to the top of the weigh bridge deck. The deck plate shall be manufactured from smooth plate 12/14/16 mm. All cables run through conduit to the point of load cell/junction boxes. Each deck is joined together by “Expert” - Load Cell Side rails will be planted into the ground next to the bridge.The weigh bridge platform is a modular design suitable for easy transportation, assembly and installation. Removal and re-installation is also possible.

The flexibility of the design allows for customization and can be adjusted to your special needs. A typical scenario is to obtain the off-road vehicle details, analysis the length and width of the vehicle and access the axle loading. From this information one then determines what design would be best suited for the application.

Product Details:

This type of Low Pit Weighbridge sits above of the road surface and requires ramps on either end to allow the vehicles to access the platform. The amount of civil foundations work required is reduced for surface mounted scales, but the overall space requirement is more. Before purchasing, check the overall height of the ‘Weigh Bridge’. Higher decks need longer ramps, which increase the overall footprint of the weigh bridge as well as the turning circle for vehicles approaching the bridge. Generally, surface mounted weigh bridges require guide rails fixed on the sides of the platform, which help vehicles to be aligned centrally on the bridge. This type of installation is better suited when the bridge may need to be shifted, or for temporary (sometimes called ‘portable’) installations.In most cases the site conditions, such as availability of space, will dictate the type of weighbridge available to you. Both surface and pit mounted weigh bridges require a firm surface with load bearing capacity, the details of which will be specified in the ‘Plan of Foundation’ drawings provided by the weigh bridge supplier.It may be advantageous to choose a weigh bridge which has a common structural design for surface and pit mounting, this will allow future flexibility for changing the type of weigh bridge

Benefits:

• Costly Pit construction is eliminated.
• Platform above ground level- No water logging during rainy season
• Problem of pit maintenance is eliminated.
• Easy maintenance since all parts accessible above ground level.
• In Pit less weigh bridges RCC ramp work must be required at least 3 meters for both sides for easy movement of vehicle

Product Details:

Concrete Platform Weighbridge
Expert is a globally prominent and popular manufacturer and exporter of various types of weighbridge, Our truck scales come in either steel or concrete to suit your application. They can be either surface or pit mounted, depending on the location and use of the scales. Our truck scales can be paired with a range of indicators, software and accessories for a complete weighing and data management software.Our company is specialized in concrete truck scales, as we do everything on the concrete truck scale including welding and mesh, and the customer only needs to pour the concrete and install the truck scale on site. There is no more labor needed.

With ever-rising steel prices, it makes great economic sense to install concrete platform weigh bridges. Apart from low costs, it offers high strength and is virtually maintenance free – requiring no painting every year. Its life is 30 years as compared to that of 15 years of a typical steel platform. Due to the advantages of concrete platforms, the developed world has been using them for over 30 years.

Salient Features:

• Steel Cum Concrete Weighbridge
• Fully Welded Fabricated Modules
• Flexible Module Design
• Low Profile
• Easy to Move
• Raft foundation helps in the Low cost of ownership.
• Strong construction, reliable & long life
• Easy loading/unloading Quick Installation
• Box Channel (Hollow) & Fully Welded I-Beam Type
• Heavy Duty RCC Top
• Both Side Vehicle Guide Rails

Product Details:

Being a leader in the industry, we are engaged in offering a qualitative range of Semi Automatic Weighbridge to our customers.

Product Details:

Being a leader in the industry, we are engaged in offering a qualitative range of Unmanned Weighbridge to our customers.

Product Details:

Being a leader in the industry, we are engaged in offering a qualitative range of Hydraulic Truck Tippler Weighbridge to our customers.

Product Details:

We excel in manufacturing and supplying a wide assortment of Electronic Truck Scale.

Product Details:

We offer a range of Dharam Kanta Weighbridge that is ideal for weighing both light and heavy weights.